DIMPLEX - Base Unit Fan Heater BFH24BWSR

General

This heater has been designed for fitting in the space behind the plinth of floor standing kitchen units or other fitted furniture units. It is recommended that the heater is not installed under cupboards used for strong perishable goods. It can be accommodated in plinths with a minimum height of 120mm and it suitable for cupboards of 500mm width and above.

Technical Specification

Controls

All Models:

Thermostat control knob on front of heater with a temperature range of approximately 5°C to 30°C. Lowest setting provides frost protection level.

Remote Control Models

BFH24BWSR:

Switch Panel – 13 amp fuse, double pole isolating switch, two single pole ON/OFF switches controlling elements.

Elements – All Models

Fully strung, helically wound, 800W and 1600W combine to give 2400W maximum output.

Thermostat – All Models

Bi-metal type, air temperature sensing.

Electrical Connections

Remote Control Models:

2.5 metre 6-core colour coded cable is supplied for connecting the heater to the switch panel. The installer must supply suitable conduit or trunking if required and a surface or flush mounting box for the switch panel. A list of suitable standard boxes is supplied with the heater.

Integral Control Models:

Supplied with 2m 3-core cable.

Thermal Safety Device

Interrupt supply to reset type.

Colour

All units supplied with a choice of white, dark brown and stainless steel fascias.

Installation

Minimum back box depth of 40mm is required behind fascia plate.