Amprobe Clamp On Meter ACD-16 PRO
Email to a FriendView Product Description
Add to Wishlist
Amprobe Clamp On Meter from products4testing.co.uk
Key Features
Simple to operate and well-suited for high current applications.
- 600V
- 1000 Amp AC current
- AC/DC voltage to 600V
- Resistance
- Continuity Beeper
- Relative zero mode
- Auto power off
- Data hold
- Carrying case included
- Large, easy to read digital display
- Accommodates conductors up to 45mm (1.77) in diameter
Included Accessories
- Test leads MTL-90B,
- Carrying case SV-U,
- Users manual
Technical Specification
General Specifications
| Display : | 3-3/4 digits 4000 counts LCD display |
|---|---|
| Update Rate : | 3 per second nominal |
| Polarity : | Automatic |
| Low Battery : | Below approx. 2.4V |
| Operating Temperature : | 0°C TO 40°C (32°F TO 104°F) |
| Relative Humidity : | Maximum relative humidity 80% for temperature up to 31°C decreasing linearly to |
| 50% relative humidity at 40°C | |
| Altitude : | Operate below 6,562ft (2000m) |
| Storage Temperature : | -20°C to 60°C (-4°F to 140ºF), < 80% R.H. (with battery removed) |
| Temperature Coefficient : | nominal 0.15 x (specified accuracy)/°C @ 0°C -18°C or 28°C -40°C |
| (32°F - 64°F OR 82°F - 104°F), or otherwise specified | |
| Sensing : | Average sensing |
| Safety : | Meets EN61010-1:2001; IEC61010-2-032(1994), EN61010-2-032(1995), UL3111-2-032(1999). |
| Category III 600 Volts AC & DC. | |
| Transient protection : | 6.5kV (1.2/50Ω;s surge) for all models |
| Pollution degree : | 2 |
| E.M.C. : | Meets EN61326 |
| In an RF field of 3V/m: | |
| Total Accuracy = Specified Accuracy + 45 digits | |
| Performance above 3V/m is not specified | |
| Overload Protections : | ACA Clamp-on jaws : AC 1000A rms continuous |
| + & COM terminals (all functions) : 600VDC/VAC rms | |
| Power Supply : | One 3V coin battery (ANSI/NEDA-5004LC, IEC-CR2032) |
| Power Consumption : | 2.2 mA typical |
| APO Timing : | Idle for 30 minutes |
| APO Consumption : | 190Ω;A typical on voltage & current functions |
| Dimension : | L224mm X W78mm X H40mm |
| Weight : | 220 gm approx |
| Jaw opening & Conductor diameter : | 45mm max |
Electrical Specifications
Accuracy is ±(% reading digits + number of digits) or otherwise specified, at 23 °C ± 5 °C (73°F ± 9°F) & less than 75% R.H.
| Function | Range | Accuracy | |
|---|---|---|---|
| DC Voltage | |||
| 400.0 mV | 1.0% + 3d | ||
| 4.000V, 40.00V, 400.0V | 1.7% + 3d | ||
| 600V | 2.0% + 4d | ||
| NMRR : | >50dB @ 50/60Hz | ||
| CMRR : | >120dB @ DC, 50/60Hz, Rs=1kΩ; | ||
| Input Impedance: | 10MΩ;, 30pF nominal (1000MΩ; for 400.0mV range) | ||
| Audible Continuity Tester | |||
| Open Circuit Voltage: | 0.4VDC typical | 400.0Ω; | 1.5% + 6d |
| Audible threshold: | between 10Ω; and 120Ω;. | ||
| Resistance | 400.0Ω; | 1.5% + 6d | |
| 4.000kΩ;, 40.00kΩ;, 400.0kΩ; | 1.0% + 4d | ||
| 4.000MΩ; | 1.5% + 4d | ||
| 40.00MΩ; | 2.5% + 4d | ||
| Open Circuit Voltage: | 0.4VDC typical | ||
| AC Voltage | 50Hz -- 500Hz | 400.0mV 1) | 4.0% + 5d |
| 50Hz -- 60Hz | 4.000V, 40.00V, 400.0V | 2.0% + 5d | |
| 60Hz -- 500Hz | 4.000V, 40.00V, 400.0V | 2.5% + 5d | |
| 50Hz -- 500Hz | 600V | 3.0% + 5d | |
| CMRR : | >60dB @ DC to 60Hz, Rs=1kΩ; | ||
| Input Impedance : | 10MΩ;, 30pF nominal | ||
| 1) Selection by RANGE button manually, and is specified from AC 40mV (AC 60mV for True RMS model ACD-6 TRMS-PRO) and up | |||
| Diode Tester | |||
| Open Circuit < 1.6 VDC | |||
| Voltage Test Current (Typical) 0.4mA | |||
| AC Current (Clamp-on) | |||
| 50Hz / 60Hz | 400.0A | 1.5% + 5d | |
| 1000A | 1.5% + 5d | ||
| 1) Add 8d to specified accuracy while reading is below 15% of range 2) Induced error from adjacent current carrying conductor: < 0.06A/A 3) Specified accuracy is for measurements made at the jaw center. When the conductor is not positioned at the jaw center, position errors introduced are: Add 1% to specified accuracy for measurements made WITHIN jaw marking lines (away from jaw opening) Add 4% to specified accuracy for measurements made BEYOND jaw marking lines (toward jaws opening) |
|||
